TP-Link TD-W8968 User Manual (English)

Other manuals for TP-Link TD-W8968

Quick Installation Guide2 pages

Specifications4 pages

Quick Install Guide4 pages

Questions and Answers:

L
Laurie BerryAug 12, 2025
What to do if TP-Link Wireless Router cannot access the internet?
- M
  markhernandezAug 12, 2025
  If you cannot access the Internet with your TP-Link Wireless Router, first check all the connectors to ensure they are well connected, including the telephone line, Ethernet cables, and the power adapter. If the issue persists, consult your ISP to verify the VPI/VCI, Connection Type, account username, and password are correct. As a last resort, restore your Modem Router to its factory default settings and reconfigure it.
D
Donald RomeroAug 16, 2025
What to do if I forgot my TP-Link TD-W8968 password?
- T
  tgibsonAug 16, 2025
  If you've forgotten your TP-Link Wireless Router password, you can restore the device to its factory default settings. Alternatively, try using the default username and password: admin, admin. You can also try to configure your Modem Router once again.
N
Nicholas JamesAug 20, 2025
What to do if I cannot access TP-Link TD-W8968 configuration page?
- R
  Robert FrancoAug 20, 2025
  If you cannot access the web-based configuration page of your TP-Link Wireless Router, configure your computer’s IP Address. Also, configure your IE browser. If these steps don't work, restore your Modem Router’s factory default settings and reconfigure your Modem Router.
S
Samuel LeeAug 23, 2025
How to reset TP-Link TD-W8968 Wireless Router to factory settings?
- N
  nmartinezAug 23, 2025
  To restore your TP-Link Wireless Router to its factory default settings, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it.
R
rachaelbrownAug 28, 2025
What to do if TP-Link Modem is unable to connect to the internet?
- J
  Justin MendozaAug 28, 2025
  If your TP-Link Modem is unable to connect to the internet, try the following: * Restart the modem by turning off the power, waiting 5 minutes, and then turning it back on. * Isolate the modem by disconnecting all other equipment from the line (including splitters, telephones, and other devices), then restart the modem and connect it directly to your computer using an Ethernet cable. * If you're using an Ethernet cable, remove it and try connecting wirelessly via Wi-Fi™ to rule out a malfunctioning cable.
J
Joseph JonesAug 31, 2025
What to do if I cannot access the Internet on my TP-Link Wireless Router?
- B
  Brittney SheppardAug 31, 2025
  First, ensure all connectors, including the telephone line, Ethernet cables, and power adapter, are securely connected. Next, verify with your ISP that the VPI/VCI, Connection Type, account username, and password are correct. As a final step, you can restore your modem router to its factory default settings and reconfigure it.
S
Sarah MooreSep 4, 2025
What to do if I forget my TP-Link TD-W8968 Wireless Router password?
- V
  villarrealdavidSep 4, 2025
  If you've forgotten your password, restore the modem router’s configuration to its factory default settings. Alternatively, try using the default user name and password: admin, admin. You can also try to configure your modem router again.
J
Julia PalmerSep 8, 2025
What to do if I cannot access the web-based configuration page of my TP-Link TD-W8968 Wireless Router?
- R
  rayshirleySep 8, 2025
  If you cannot access the web-based configuration page, configure your computer’s IP Address and your IE browser. If the issue persists, restore your modem router’s factory default settings and reconfigure your modem router.

TP-Link TD-W8968 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	4
DSL specification	ADSL: ANSI T1.413 2, ITU-T G.992.1(G.DMT), ITU-T G.992.2(G.Lite), ITU-T G.994.1, (G.hs), ITU-T G.995.1, ADSL2: ITU-T G.992.3 (G.dmt.bis), ITU-T G.992.4 (G.lite.bis), ADSL2+: ITU-T G.992.5
Input current	1.5 A
Rack mounting	No
Frequency range	2.4 - 2.4835 GHz
Power requirements	DC 12V
Filtering description	MAC, IP, Packet, URL
Operating temperature (T-T)	32 - 104 °F
Compatible operating systems	Microsoft Windows 98SE, NT, 2000, XP, Vista, 7, \\r MAC OS, \\r NetWare, \\r UNIX, \\r Linux
WLAN data transfer rates supported	300 Mbit/s
DHCP client	-
Routing protocols	RIP-1, RIP-2
Supported network protocols	ATM/PPP, PPTP, PPPoE, PPPoA, IPoA, PVC, L2TP, FTP, DHCP
Security algorithms	128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK
Antennas quantity	2
Antenna connector type	RP-SMA
Antenna gain level (max)	6 dBi
Certification	CE, FCC, RoHS
Storage temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45), Phone (RJ-11)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Product color	White