How to fix TP-Link Wireless Router if power light is off?
Make sure that the power supply converter is plugged into a properly working electrical outlet. Check your power cable. Ensure you are connected to a live electrical outlet, the connections are secured, and the modem is turned on.
What to do if TP-Link TD-W8901G Wireless Router has incorrect PPP username/password?
If the log reports "PAP: login to remote failed; please check user/pswd", it means the PPP username and password are incorrect. Please go through the Quick Start again and enter the correct PPP username/password and VPI/VCI values.
What to do if there is no link between PC and DSL modem TP-Link TD-W8901G Wireless Router?
Check the physical connection (Ethernet cable or wireless connection) between the PC and the modem router to ensure they are correctly connected.
What to do if ADSL Light is off on TP-Link TD-W8901G Wireless Router?
Verify that the ADSL modem router is correctly connected to the wall jack or the filter and that the cable does not have any visible damage. Replace any cable that appears damaged. Check the activity of the ADSL service with your ISP.
General| Wireless Speed | Up to 54Mbps |
|---|---|
| Frequency Band | 2.4GHz |
| ADSL Speed | Downstream: up to 24Mbps, Upstream: up to 3.5Mbps |
| Wireless Standards | IEEE 802.11g, IEEE 802.11b |
| ADSL Standards | ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.994.1 (G.hs) |
| Ports | 4 x 10/100Mbps LAN, 1 x RJ-11 ADSL |
| Antenna | 1 x Fixed |
| Security | 64/128-bit WEP, WPA |
| Protocols | TCP/IP, PPPoE, PPPoA, DHCP |
| Weight | 0.6 lbs (273g) |
To Next Page
