TD-8616 ADSL2+ Modem User Guide
6
TD-8616. Connect the other end to the MODEM port of the external splitter.
Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s
Ethernet port or a regular hub/switch port, and the other end to the LAN port on the
TD-8616.
Step 3: Attach the power adapter. Connect the power adapter to the POWER connector on the
rear of the device and plug in the adapter to a wall outlet or power extension.
Step 4: Turn on the TD-8616 and power on the computers and LAN devices.
Figure 2-4
To Next Page
Loading...
Need help?
General
