TD-W8101G 54M Wireless ADSL2+ Router User Guide
23
Figure 4-11
• DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN
side.
)
Note:
If you select Disabled, the DHCP function will not take effect.
4.3.3 Wireless
Choose “Interface Setup→Wireless” menu, and you will see the Wireless screen (shown in
Figure 4-12 ). Please configure the parameters for wireless according to the descriptions below.
Figure 4-12
¾ Access point Settings: These are the settings of the access point. You can configure the
rules to allow wireless-equipped computers and other devices to communicate with a wireless
network.
• Access point: Select Activated to allow wireless station to associate with the access
To Next Page
Loading...
