TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
38
Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
Method Two:
Step 1: Press the WPS button on the front panel of the Router or click Start WPS button in
Figure 4-21.
Step 2: For the configuration of the wireless adapter, please choose “Push the button on
my access point” in the configuration utility of the WPS as below, and click Next.
To Next Page
Loading...
