TP-Link TD-W8951ND Quick Installation Guide

1
Before cable connection, keep your hands dry. If you currently use a
modem, disconnect it now - the Modem Router will replace your current
modem.
Connect your computer to the Port
labeled “1~4” on the Router with
an Ethernet cable.
Connect the splitter to the wall jack
using a telephone line, then use
the other telephone line to connect
to the ADSL port on the Router
and the MODEM port of the
splitter, also have the PHONE port
of the splitter connected to a
telephone.
If no telephone is needed, please connect the ADSL port of the Router to
the wall jack using the telephone line directly.
Note
Please use only wired network connections to configure the Router.
Installation
Note
The product model shown in this QIG is TD-W8951ND, as an example.
Note

TP-Link TD-W8951ND Specifications

General

VPN support	PPTP, L2TP, IPSec
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Input current	0.85 A
Rack mounting	No
Frequency range	2.4 - 2.4835 GHz
Operating temperature (T-T)	32 - 104 °F
WLAN data transfer rates supported	150 Mbit/s
DHCP client	-
Supported network protocols	PPPoE, PPPoA, IPoA
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Security algorithms	128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK
Certification	CE, FCC, RoHS
Storage temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
DSL specification	ANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-T G.994.1, ITU-T G.995.1, ITU-T G.996.1, ITU-T G.997.1, ITU-T K.2.1, ITU-T G.992.3, ITU-T G.992.4, ITU-T G.992.5
Antenna gain level (max)	3 dBi
Product color	White
Wi-Fi standards	802.11b, 802.11g
Top Wi-Fi standard	802.11g

Weight and Dimensions

Depth	120 mm
Width	174 mm
Height	29 mm
Weight	- g