7
All the existed
ATM
&
WAN
service will be clean after click the "
Save
"
button on this Quick Setup page.
Now, your ADSL Modem Router
has been configured and is
rebooting. Please do not power off
the Router while it’s rebooting.
The basic settings for your Router are completed. Please open the web browser
and log on to the following websites:
http://www.tp-link.com
http://www.google.com
If the above websites can be accessed, it indicates that your Router has been
configured successfully and you can start to enjoy the Internet. If the websites
cannot be accessed, please refer to “T4. What can I do if I cannot access the
internet?” in the Troubleshooting guide.
For the advanced configurations
，
please refer to the User Guide on the
CD-ROM provided.
The above configurations only need to be set once. If you want other
computers in your LAN to access the Internet, please connect the desired
computer to the ADSL Router directly. If the additional computer can not
access the Internet, please set that computer referring to”
T3. What can I
do if I cannot access the web-based configuration page?
” in the
Troubleshooting
guide.
Note
Note
Note
Click Reboot
Click Save
If you select WPA-PSK,
WPA2-PSK or
WPA-PSK/WPA2-PSK, you will
need to set a Pre-Shared Key.
To Next Page
Loading...
