TP-Link TD-W9980 User Manual (English)

Other manuals for TP-Link TD-W9980

Questions and Answers:

W
willispaulaJul 26, 2025
What to do if TP-Link TD-W9980 Wireless Router cannot access the Internet?
- R
  richardfletcherJul 27, 2025
  If you cannot access the internet with your TP-Link Wireless Router, first, check that all connectors, including the telephone line, Ethernet cables, and power adapter, are well connected. If the connections are correct, try to log on to the Web-Management page of the modem router. If you can access it, proceed with troubleshooting. If not, configure your computer settings as described in the manual. Also, verify with your ISP that the VPI/VCI, Connection Type, account username, and password are correct. If issues persist, restore your modem router to its factory default settings and reconfigure it.
O
obarryAug 3, 2025
What to do if I forgot my TP-Link TD-W9980 Wireless Router password?
- S
  smithmaryAug 3, 2025
  If you forget your TP-Link Wireless Router password, restore the modem router’s configuration to its factory default settings. Alternatively, try using the default username and password: admin, admin. You can also try to configure your modem router once again by following the instructions in the Quick Installation Guide.
E
elizabethhowardAug 10, 2025
How to reset TP-Link Wireless Router to factory settings?
- P
  Pamela LopezAug 11, 2025
  To restore your TP-Link modem router’s configuration to its factory default settings, ensure the modem router is powered on, then press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it.
A
Anthony HarrisonAug 18, 2025
What to do if TP-Link TD-W9980 Wireless Router cannot access web-based configuration page?
- R
  Richard AdamsAug 18, 2025
  If you cannot access the web-based configuration page of your TP-Link Wireless Router, configure your computer’s IP Address. After configuring the IP address, try logging on to the web-based management page again. If you still cannot access the configuration page, restore your modem router’s factory default settings and reconfigure your modem router.

TP-Link TD-W9980 Specifications

General

Frequency	2.4GHz and 5GHz
Security	64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Wireless Standard	802.11a/b/g/n
Ports	4 x 10/100/1000 Mbps LAN
USB Ports	2 x USB 2.0
Weight	500 g
Antenna	3 x external detachable antennas