TP-Link TD-W8961ND - Page 6

7) Connecting to ADSL Network
8) Configuration
This page is where you configure the wireless component of the router. The
security starts out disabled; we highly encourage our customers to create and
use a Password for their wireless network. The ideal authentication type is
“WPA2-PSK”.
This page contains the settings needed to connect to the ADSL network. They
Need to look the same as above; all you should need to do is change the VPI to 0
and VCI to 33. Leave the connection type alone (unless it’s different from the
image Above). Then Click Next.