TP-Link TD-W8968 - Page 3

7) Each router is idened using a node idener. This is a unique single digit number clearly
marked on the underside of the router. Open a web browser and visit hp://192.168.3.1 to
connect to node 1
8) When prompted for sign in credenals , please input the following:
Username: admin Password: Bonding123 (we recommend you change this password)
9 In the menu posioned at the le of the displayed web page, select ‘Quick Setup’
10) In the ’Country’ drop down, select your country
11) In the ‘ISP’ drop down, select the Internet Service Provider associated with the line that
you are connecng this node to
12) In the ‘PPP Username’ eld and ‘PPP Password’ eld, input the corresponding ADSL logon
credenals provided by your ISP. You should have received these credenals directly from
your ISP when they processed your internet access subscripon. If you’re unable to locate
them, please request them from your ISP
13) Click the ‘Next’ buon
14) Click the ‘Conrm’ buon and then wait for 30 seconds to elapse
15) Aer 30 seconds has elapsed, click ‘Management’
16) Click the reboot buon towards the middle of the screen
17) Repeat above steps 7-16 for each of the remaining nodes. Each node has a dierent IP
address which corresponds with the number marked on the underside of the router. For
example router two can be accessed by vising hp://192.168.3.2, router 3 (if applicable)
can be accessed by vising hp://192.168.3.3, etc…
www.sharedband.com 3 TP-Link TD-W8968 QIG