2. Configuring the Modem Router
Connect your computer to the modem router (Wired or Wireless).
Or
Wireless
1
Connect wirelessly by using the default
network name (SSID) and password
on the product label printed on the
bottom of the modem router.
Wired
Ethernet cable
Open a web browser on the computer and configure the modem router according to the following main clues.
2
Enter http://tplinkmodem.net or 192.168.1.1 in the
address bar. Type in admin for both the username
and password and click OK.
Note: If the login window does not appear, please refer to
FAQ->Q1.
a
c
d
b
Choose Quick Setup in the main menu and then click Next
to start the configuration. Select your Region and Time Zone
from the drop-down list, and then click Next.
Region
Back
Next
Please Select
Please Select
Time Zone
Quick Setup-Region and Time Zone
f
g
e
1. Connecting the Hardware
1
2
Note: If you don’t need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable.
Note: Please wait 1-2 minutes until the ADSL LED is on.
Connect the splitter and power adapter as follows. Then press the POWER ON/OFF button.
Check the Power and ADSL LED lights to ensure the hardware connection is correct.
Power (On) ADSL (On)
Phone Jack
Splitter
ADSL
USB LAN1
LAN2LAN3
LAN4/WAN
POWER
USB LED
WiFi ON/OFF
WPS
RESET
Select Ye s to auto detect your connection type and then click
Next to continue.
Back
Next
Quick Setup-Auto Detection
Yes.
No. I want to configure the Internet connection myself.
Auto-Detect Connection Type:
Enter the parameters provided by your ISP and then
click Next. Here we take PPPoE as an example.
Back
Next
XXXXXX
XXXXXX
XXXXXX
Quick Setup-PPPoE
DSL PVC:
Auto-detection has succeeded!
8/35
Encapsulation Mode:
LLC
Connection Type:
PPPoE
Username:
Password:
Confirm Password:
Enable 3G/4G as a backup solution for Internet access.
Quick Setup- 3G/4G
Back
Next
Click Next to continue.
Note: You may rename your wireless network name and create your own
password.
Finish
Quick Setup-Complete
Operation Mode Configuring: Success
WAN Connection Configuring: Success
Gateway and DNS Configuring: Success
3G Connection Configuring: Success
Wireless Configuring: Success
Time Zone Configuring: Success
Enjoy!
Now your wired and wireless
devices can connect to the Internet!
Note: If you have changed your wireless
network name and password, you must
sign in with the new name/password to
regain access to the Internet.
Click Finish to complete the setup.
Back
Next
Wireless Network Name and Password
Wireless Network Name:
Password:
TP-LINK_XXXX
XXXXXXXX
Channel:
Mode:
Security:
Click Next to continue.
Note: You may enable 3G/4G as a backup method for Internet access.
To Next Page
