What to do if I cannot access the Internet on my TP-Link Wireless Router?
If you cannot access the Internet, ensure all connectors, including the telephone line, Ethernet cables, and power adapter, are well-connected. Also, verify with your ISP that the VPI/VCI, Connection Type, account username, and password are correct. As a last resort, restore your modem router to its factory default settings and reconfigure it.
What to do if I forget my TP-Link td-w8970 Wireless Router password?
If you've forgotten your password, try restoring the modem router to its factory default settings. Alternatively, use the default username 'admin' and password 'admin'. You can also try to configure your modem router once again by following the instructions in the Quick Installation Guide.
What to do if I cannot access the web-based configuration page of my TP-Link td-w8970 Wireless Router?
If you cannot access the web-based configuration page, configure your computer’s IP Address. Alternatively, restore your modem router’s factory default settings and reconfigure your modem router following the instructions in the Quick Installation Guide.
How to reset TP-Link td-w8970 to factory settings?
To restore your modem router’s configuration to its factory default settings, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it.
What to do if TP-Link Wireless Router cannot access the internet?
If your TP-Link Wireless Router cannot access the internet, ensure all connectors, including the telephone line, Ethernet cables, and power adapter, are securely connected. Verify with your ISP that the VPI/VCI, Connection Type, account username, and password are correct. If necessary, restore your modem router to its factory default settings and reconfigure it.
What to do if I cannot access the web-based configuration page of TP-Link Wireless Router?
If you cannot access the web-based configuration page for your TP-Link Wireless Router, configure your computer’s IP Address. Alternatively, restore your modem router’s factory default settings and reconfigure your modem router.
General| VPN support | PPTP, L2TP, IPSec Pass-through |
|---|---|
| Ethernet LAN | Yes |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| VPN tunnels quantity | 10 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Antennas quantity | 2 |
| Antenna connector type | RP-SMA |
| Antenna gain level (max) | 5 dBi |
| DHCP client | - |
| Routing protocols | RIP-1, RIP-2 |
| Supported network protocols | DHCP, ATM/PPP |
| RJ-11 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| Security algorithms | 128-bit AES, 128-bit WEP, 256-bit AES, 3DES, 64-bit WEP, DES, MD5, SHA-1, SSL/TLS, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS |
| Authentication method | MD5, SHA-1 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Certification | CE, FCC, RoHS, IPv6 |
| Cables included | LAN (RJ-45) |
| USB version | 2.0 |
| Compatibility | IPv6 |
| Input current | 1.5 A |
| Input voltage | 12 V |
| Rack mounting | No |
| Frequency band | 2.4 GHz |
| Frequency range | 2.4 - 2.4835 GHz |
| Filtering description | MAC / IP / URL |
| WLAN data transfer rates supported | 300 Mbit/s |
| Product color | Black |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| Power source type | DC |
Weight and Dimensions| Depth | 140 mm |
|---|---|
| Width | 225 mm |
| Height | 32.5 mm |
| Weight | - g |
To Next Page
