17
Chapter 4
Set Up Internet Connections
Note:
If there is no available WAN connection to choose, make sure you have connected to the internet and the connection
type is not Bridge.
Done!
Now you can visit the IPv6 websites with the 6rd tunnel.
Tips: The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN
connection and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.
4. 4. Test Internet Connectivity
After manually set up the internet connection, you need to know the internet connectivity.
The router provides a diagnostic tool to help you locate the malfunction.
1. Visit
http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced > System Tools > Diagnostics page.
To Next Page
Loading...
