78
Chapter 13
Administrate Your Network
3. Focus on the Online Upgrade section, and click Upgrade.
4. Wait a few moments for the upgrading and rebooting.
13. 2. 2. Local Upgrade
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit
http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the
router.
3. Go to
Advanced > System Tools > Firmware Upgrade.
4. Focus on the Device Information section. Make sure the downloaded firmware file matches
with the
Hardware Version.
5. Focus on the
Local Upgrade section. Click Browse to locate the downloaded new firmware
file, and click Upgrade.
6. Wait a few moments for the upgrading and rebooting.
13. 3. Back up and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can back
up the configuration file to your computer for future use and restore the router to a
previous settings from the backup file when needed. Moreover, if needed you can erase
the current settings and reset the router to the default factory settings.
• To back up configuration settings:
1. Visit
http://tplinkmodem.net, and log in your TP-Link ID or with the password you
set for the router.
2. Click
Advanced > System Tools > Backup & Restore page.
3. Click
Backup to save a copy of the current settings to your local computer. A conf.
bin file will be stored to your computer.
To Next Page
Loading...
