31
Chapter 7
Network Security
2 ) Select the device(s) to be blocked in the Online Devices table.
3 ) Click
Block above the Online Devices table. The selected devices will be added
to Devices in Blacklist automatically.
To allow specific device(s)
1 ) Select
Whitelist and click Save.
2 ) Click
Add.
3 ) Click Scan and select the device you want to add in the whitelist. Or enter the
Device Name and MAC Address manually.
4 ) Click
Save.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the
Blacklist or Whitelist.
7. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and other ARP attacks.
How can I do that?
1. Visit
http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to
Advanced > Security > IP & MAC Binding and enable IP & MAC Binding.
To Next Page
Loading...
