61
Chapter 12
Specify Your Network Settings
Method 2 Enter the client device’s PIN on the router
1. Visit
http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced > Wireless > WPS page.
3. Select Method Two--PIN and select Client’s PIN radio button.
4. Enter the client device’s PIN in the field, then click
Connect.
5.
Connect successfully will appear on the above screen, which means the client
device has successfully connected to the router.
Method 3 Enter the router’s PIN on your client device
Use this method if your client device asks for the router’s PIN.
1. Visit
http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced > Wireless > WPS page.
3. Take a note of the Current PIN of the router. You can also click the Generate button
to get a new PIN.
4. On the client device, enter the router’s PIN. (The default PIN is also labeled on the
bottom of the router.)
To Next Page
Loading...
