TL-MR3020 Portable 3G/4G Wireless N Router
The WPS Configuration Screen of Wireless Adapter
Method Three:
Step 1. Keep the default WPS Status as Enabled and click the Add device button in Figure
4-2, then the following screen will appear.
Figure 5-3 Add A New Device
Step 2. Choose Press the button of the new device in two minutes and click Connect.
Step 3. Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 4. Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
-115-
To Next Page
Loading...
