EasyManua.ls Logo

TP-Link TL-MR3020 - Wireless Security

TP-Link TL-MR3020
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-MR3020 Portable 3G/4G Wireless N Router
WEP Index - This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the index of the WEP key.
Auth Type - This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to fill
the password in this blank.
4.6.2 Wireless Security
Choose menu “WirelessWireless Security”, you can configure the security settings of your
wireless network.
There are five wireless security modes supported by the Router: WEP (Wired Equivalent
Privacy), WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK
(Pre-Shared Key), WPA-PSK (Pre-Shared Key).
Figure 4-24
Disable Security
- If you do not want to use wireless security, select this check box, but it’s
strongly recommended to choose one of the following modes to enable security.
-55-

Table of Contents

Other manuals for TP-Link TL-MR3020

Related product manuals