TL-MR3020 Portable 3G/4G Wireless N Router
The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses
one of these protocols, then you must configure your connection manually.
4.5.4 MAC Clone
Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on
the screen below, Figure 4-20:
Figure 4-20 MAC Address Clone
quire that you register the MAC Address of your adapter. Changes are rarely
needed here.
MAC address
into this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).
MAC
Address To button and this MAC address will
fill in the WAN MAC Address field.
estore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Save button to save your settings.
you
r LAN can use the MAC Address Clone function.
nu “Net
work→LAN”, you can configure the IP parameters of the LAN on the screen
as below.
Some ISPs
re
WAN MAC Address - This field displays the current MAC address of the WAN port. If
your ISP requires you to register the MAC address, please enter the correct
Your PC's MAC Address - This field displays the MAC address of the PC that is
managing the Router. If the MAC address is required, you can click the Clone
Click R
Click the
Note:
Only the PC on
4.5.5 LAN
Choose me
-51-
To Next Page
Loading...
