TL-MR3020 Portable 3G/4G Wireless N Router
6.3 Quick Setup
Please refer to Chapter 3: "Quick Installation Guide."
6.4 WPS
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This
section will guide you to add a new wireless device to an existing network quickly by function.
The WPS function is only available when the Operation Mode is set to Access Point and
Multi-SSID. Here we take the Access Point mode for example. Select menu “WPS”, you will see
the next screen shown in Figure 6-2.
Figure 6-2 WPS
WPS Status - To enable or disable the WPS function here.
Current PIN - The current value of the device's PIN is displayed here. The default PIN of
the device can be found i
Restor
n the label or User Guide.
e PIN - Restore the PIN of the device to its default.
PIN - Click this button, and then you can get a new random value for the
device's PIN. You can ensure the network security by generating a new PIN.
Add device - You can add a new device to the existing network manually by clicking this
button.
Gen New
-190-
To Next Page
Loading...
