TL-MR3020 Portable 3G/4G Wireless N Router
Figure 6-24 Time settings
Time Zone - Select your local time zone from this pull down list.
Date - Enter your local date in MM/DD/YY into the right blanks.
Time - Enter your local time in HH/MM/SS into the right blanks.
NTP Server I / NTP Server II - Enter the address or domain of the NTP Server I or NTP
Server II, and then the Router will get the time from the NTP Server preferentially. In
addition, the Router built-in some common NTP Servers, so it can get time automatically
once it connects the Internet.
Enable Daylight Saving - Check the box to enable the Daylight Saving function.
Start - The time to start the Daylight Saving. Select the month in the first field, the week in
the second field, the day in the third field and the time in the last field.
End - The time to end the Daylight Saving. Select the month in the first field, the week in
the d and the time in the last field.
us - Displays the status whether the Daylight Saving is in use.
al time zone.
2. Enter the Date in Month/Day/Year format.
3. Enter the Time in Hour/Minute/Second format.
4. Click Save.
second field, the day in the third fiel
Daylight Saving Stat
To set time manually:
1. Select your loc
-223-
To Next Page
Loading...
