TL-MR3020 Portable 3G/4G Wireless N Router
Region - This field determines which operating frequency will be used. To
achieve more information, you can read the same glossary in Access Point part.
If you choose Bridge with AP, the next screen will appear as shown in Figure 3-25.
This operation mode bridges the AP and up to 4 APs also in bridge mode to connect two
or more wired LANs.
Figure 3-25 Quick Setup – Bridge with AP
Wireless Network Name (SSID) - Enter a string of up to 32 characters. To
achieve more information, you can read the same glossary in Access Point part.
Region - This field determines which operating frequency will be used. To
achieve more information, you can read the same glossary in Access Point part.
Channel - This field determines which operating frequency will be used. To
achieve more information, you can read the same glossary in Access Point part.
Add a remote AP - Click the Survey button to fill in the MAC of remote AP (1-4)
field.
MAC of remote AP (1-4) - Enter the MAC address of AP that you want to access.
-23-
To Next Page
Loading...
