9
Chapter 2
Use the Powerline Adapter
Now enjoy the secure network!
2. 4. Add a Powerline Adapter to an Existing Powerline
Network
Add a powerline adapter into the existing powerline network to
extend the network.
For example, I have previously set up a powerline network, but
the network is still not big enough to provide Internet access
for all wired devices in my home. So I bought a new powerline
adapter to extend the network.
1. Plug the new powerline adapter into a wall socket near one
of the existing powerline devices.
Existing Powerline Network
A
Pair
B
Pair
C
Pair
2. Wait for a while, and check whether the Powerline LED
stays on. If yes, go to step 3. If no, continue with step 2 to
pair the new powerline adapter with one of the existing
powerline devices.
a . Press the Pair button of one existing powerline device for
1 second. The Power LED starts blinking.
b . Within two minutes, press the Pair button on the new
powerline adapter for 1 second. The Power LED starts
blinking. When the Powerline LED stays on, the pairing
process is done, and the new powerline adapter have
been added to the network successfully!
Done!
I want to:
How can I
do that?
To Next Page
Loading...
