TL-PS110U Single USB2.0 Port Fast Ethernet Print Server
16
Figure 3-24
4. Select Internet Protocol (TCP/IP), and then double click it or click Properties.
Figure 3-25
5. Select “Use the following IP address” and input a static IP address 192.168.0.X (1<X<10 or
10<X<255, for 192.168.0.10 is the default IP address of the print server), Subnet mask
255.255.255.0. Click OK.
)Note:
The IP address must be within the same subnet as your wireless print server. For example, if the
IP address of your printer server has been changed to 192.168.1.10, then the IP address should
be configured as 192.168.1.X (1<X<10 or 10<X<255).
To Next Page
Loading...
