TP-Link TL-PS110U - Appendix A: Resetting the Print Server

TL-PS110U Single USB2.0 Port Fast Ethernet Print Server
47
Appendix A: How to Reset the Print Server
If you lose the connection with the TL-PS110U by doing wrong configuration, you need to reset it
to factory and reconfigure it again.
Here are the steps for the resetting
1. Unplug the power adapter of the TL-PS110U;
2. Press and hold the Reset button on the TL-PS110U;
3. Plug in the power adapter of the print server with the Reset button pressed for about 10
seconds.
4. Release the Reset button.
5. The print server will restart.