Need help?Do you have a question about the TP-Link TL-SG116E and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Switch layer | L2 |
| Web-based management | - |
| Quality of Service (QoS) support | Yes |
| Certification | FCC, CE, RoHS |
| Product color | Black |
| Rack mounting | No |
| Housing material | Metal |
| Number of VLANs | 32 |
| Networking standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Virtual LAN features | Tagged VLAN, Protocol-based VLAN |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e, Cat6 |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Package depth | 412 mm |
| Package width | 170 mm |
| Package height | 70 mm |
| Package weight | 1360 g |
| Cables included | AC |
| Power source | DC |
| Input current | 1 A |
| Input voltage | 12 V |
| Power consumption (max) | 9.19 W |
| Jumbo frames | 10000 |
| Forwarding rate | 23.81 Mpps |
| Number of queues | 4 |
| MAC address table | 8000 entries |
| Packet buffer memory | 4.1 MB |
| Heat dissipation | 31.68 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Installed SFP modules quantity | 0 |
| Gigabit Ethernet (copper) ports quantity | 16 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 111.7 mm |
|---|---|
| Width | 286 mm |
| Height | 25.4 mm |
To Next Page
