TP-Link TL-SG116E Installation Guide

7106508146 REV4.0.3
5/8/16-Port Gigabit Unmanaged Pro Switch
1000M (Green)
On: Running at 1000Mbps
Flashing: Transmitting/receiving data
10/100M (Yellow)
On: Running at 10/100Mbps
Flashing: Transmitting/receiving data
Conguration
The switch is plug and play. To congure the switch, you can use the Web-based
GUI or the conguration utility.
The utility is only supported on Windows now.
Double click the switch that you want to congure. Log in with admin as both
user name and password.
5.
Using the Conguration Utility
1. Go to https://www.tp-link.com/support and search the model number of your
switch. Download the Unmanaged Pro Conguration Utility from the product
Support web page on your PC.
Using the Web-based GUI
Find out the IP address of the switch.
By default, the switch receives an IP addess from a DHCP server (or a router that
functions as a DHCP server) in your network. You can nd out this IP address on
the DHCP server.
If the switch cannot receive an IP address from a DHCP server, it uses the static
IP address of 192.168.0.1, with a subnet mask of 255.255.255.0.
1.
Congure IP address on your PC to make sure the switch and PC are in the same subnet.
If the switch uses an IP address assigned by a DHCP server, set your PC to obtain an
IP address automatically from the DHCP server.
If the switch uses the static IP address of 192.168.0.1, congure your PC’s IP address
as 192.168.0.x (”x” ranges from 2 to 254), and subnet mask as 255.255.255.0.
2.
Note: If the switch gets a new IP address from the DHCP server, your connection to the
switch will be lost. Enter the new IP address in your browser to access the switch again.
Installation Guide
TL-SG105E/TL-SG108E/TL-SG116E
LED Explanation
Power
On: Power on
O: Power o
Link/Act
Note: For simplicity, we will take TL-SG108E for example throughout this Guide.
Connection
Ethernet Ports (1-8)
TL-SG108E
PC PC
Router
LAN PortWAN Port
Internet
Click to nd out IP parameters of the switch. 4.
Double click the icon on the desktop,
and the utility Home page will display a
list of TP-Link switches on the local
network.
3.
2. Decompress the downloaded le, run the
installation wizard and follow the prompts to
install the Unmanaged Pro Conguration
Utility.
Launch a web browser on your PC. Enter the IP address of the switch in the address bar
and press Enter. Log in with admin as both user name and password.
3.
Now you can congure the switch using the Web-based GUI. For further information, refer to
the User Guide. Go to https://www.tp-link.com/support, search the model number of your
switch, and you can nd this guide on the product Support web page.
Now you can congure the switch using the Conguration Utility. For further
information, refer to the Unmanaged Pro Conguration Utility User Guide. Go to
https://www.tp-link.com/support, search the model number of your switch, and you
can nd this guide on the product Support web page.
If the switch uses the static IP address of
192.168.0.1, congure your PC’s IP address
as 192.168.0.x (”x” ranges from 2 to 254), and
subnet mask as 255.255.255.0.
If the switch uses an IP address assigned by
a DHCP server, set your PC to obtain an IP
address automatically from the DHCP server.

TP-Link TL-SG116E Specifications

General

Switch type	Unmanaged
Switch layer	L2
Web-based management	-
Quality of Service (QoS) support	Yes
Certification	FCC, CE, RoHS
Product color	Black
Rack mounting	No
Housing material	Metal
Number of VLANs	32
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Virtual LAN features	Tagged VLAN, Protocol-based VLAN
Cable types supported	Cat3, Cat4, Cat5, Cat5e, Cat6
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Package depth	412 mm
Package width	170 mm
Package height	70 mm
Package weight	1360 g
Cables included	AC
Power source	DC
Input current	1 A
Input voltage	12 V
Power consumption (max)	9.19 W
Jumbo frames	10000
Forwarding rate	23.81 Mpps
Number of queues	4
MAC address table	8000 entries
Packet buffer memory	4.1 MB
Heat dissipation	31.68 BTU/h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Installed SFP modules quantity	0
Gigabit Ethernet (copper) ports quantity	16
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	111.7 mm
Width	286 mm
Height	25.4 mm