Need help?Do you have a question about the TP-Link TL-SG1218MP and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Quality of Service (QoS) support | Yes |
| Combo SFP ports quantity | 2 |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 18 |
| Jumbo frames | 10000 |
| Forwarding rate | 26.78 Mpps |
| MAC address table | 8000 entries |
| Packet buffer memory | 4.1 MB |
| 10G support | No |
| Networking standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e, Cat6 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Heat dissipation | 977.44 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 286.64 W |
| Package depth | 528 mm |
| Package width | 250 mm |
| Package height | 80 mm |
| Package weight | 3050 g |
| Total Power over Ethernet (PoE) budget | 250 W |
| Power over Ethernet (PoE) power per port | 30 W |
| Power over Ethernet plus (PoE+) ports quantity | 16 |
| Stackable | - |
| Form factor | 1U |
| Certification | CE, FCC, RoHS |
| Product color | Black |
| Number of fans | 2 fan(s) |
| Housing material | Metal |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 440 mm |
| Height | 44 mm |
Provides general information about the switch's capabilities and upgrade path.
Instructions for using the reset button to restore factory default settings.
Essential safety rules to prevent device damage and personal injury during installation.
How to access the switch's management interface via Web-based GUI or utility.
Procedure to reset forgotten username and password using the reset button.
Troubleshooting steps for issues accessing the web management page.
Reasons and solutions for the Power or PWR LED not illuminating.
Troubleshooting steps when the Link/Act LED does not light up.
To Next Page