6
Unmanaged/Easy Smart Rackmountable Switches
Introduction
The front panel of TL-SG1218MPE is shown as the following figure.
Figure 1-19 Front Panel of TL-SG1218MPE
10/100/1000 Mbps
RJ45 Port
ResetLEDs SFP Port
The front panel of TL-SG1428PE is shown as the following figure.
Figure 1-20 Front Panel of TL-SG1428PE
LEDs Reset SFP Port10/100/1000 Mbps RJ45 Port
LED Indication
Power
PWR
On: The switch is powered on.
Off: The switch is powered off or power supply is abnormal.
Flashing: Power supply is abnormal.
Note: PWR for TL-SG1016PE/TL-SF1024/TL-SG1218MP/TL-SG1218MPE/TL-SG1428PE;
Power for other switches.
1000Mbps
On: Running at 1000 Mbps.
Off: Running at 10/100 Mbps or no device is linked to the corresponding port.
Note: For TL-SG1008/TL-SG1008MP/TL-SG1016/TL-SG1016D/TL-SG1016S/
TL-SG1016DE/TL-SG1024/TL-SG1024D/TL-SG1024S/TL-SG1024DE.
Link/Act
On: A device is linked to the corresponding port and running properly.
Flashing: Transmitting or receiving data.
Off: No device is linked to the corresponding port.
Note: For TL-SG1008/TL-SG1008MP/TL-SF1016/TL-SG1016/TL-SG1016D/TL-SG1016S/
TL-SF1016DS/TL-SG1016DE/TL-SF1024/TL-SF1024D/TL-SG1024/TL-SG1024D/
TL-SG1024S/TL-SG1024DE/TL-SF1048.
Green On: Running at 1000 Mbps but no activity.
Green Flashing: Running at 1000 Mbps and is transmitting or receiving data.
Yellow on: Running at 100/10 Mbps but no activity.
Yellow Flashing: Running at 100/10 Mbps and is transmitting or receiving data.
Off: No device is linked to the corresponding port.
Note: For TL-SG1048, port 1–18 of TL-SG1218MP/TL-SG1218MPE, and port 1–26 of
TL-SG1428 PE .
Port 17F–18F of TL-SG1218MP/TL-SG1218MPE, and port 27–28 of TL-SG1428PE only
support 1000M SFP module connection, and they just have Green On/Green Flashing/
Off LED indications
To Next Page
Loading...
