7
Unmanaged/Easy Smart Rackmountable Switches
Introduction
LED Indication
Speed
Green On: Running at 1000 Mbps but no activity.
Green Flashing: Running at 1000 Mbps and is transmitting or receiving data.
Yellow on: Running at 100/10 Mbps but no activity.
Yellow Flashing: Running at 100/10 Mbps and is transmitting or receiving data.
Off: No device is linked to the corresponding port.
Note: Only for TL-SG1016PE.
PoE Status
On: The port is connecting and supplying power to a PD.
Flashing: The PoE power circuit may be in short or the power current may be overloaded
or non-standard PD is connected or the amount of power of the port has exceeded the
power limit.
Off: No PD is connected to the corresponding port or no power is supplied according to
the power limits of the port.
Note: For TL-SG1008MP/TL-SG1016PE/TL-SG1218MP/TL-SG1218MPE/TL-SG1428PE
PoE Max
On: Total power supply is between 146 W and 153 W. No power may be supplied if
additional PDs are connected.
Flashing: Total power supply is equal to or greater than 153 W.
Off: Total power supply is less than 146 W.
Note: Only for TL-SG1008MP.
On: Total power supply is between 143 W and 150 W. No power may be supplied if
additional PDs are connected.
Flashing: Total power supply is equal to or greater than 150 W.
Off: Total power supply is less than 143 W.
Note: Only for TL-SG1016PE.
On: Total power supply is equal to or greater than 243 W.
Flashing: Total power supply is equal to or greater than 243 W and lasts for more than 2
minutes.
Off: Total power supply is less than 243 W.
Note: For TL-SG1218MP/ TL-SG1218 MPE / TL-SG1428PE
FAN
Green: The fan works properly.
Yellow: The fan doesn't work properly.
Note: For TL-SG1016PE/TL-SG1218MP/TL-SG1218MPE/TL-SG1428PE
Note:
For models that support the LED On/Off feature, the LEDs function as shown above only
when the LED status is on.
Reset
Press this button for ve seconds or above to reset the switch back to factory default settings.
Note:
Only TL-SG1016DE/TL-SG1016PE/TL-SG1024DE/TL-SG1218MPE/TL-SG1428PE has a Reset
button.
To Next Page
Loading...
