TP-Link TL-SG2008 - Login to the Switch; Login; Configuration

English
5
Note:
The product model shown in this QIG is “TL-SG2008",as an example�
Connection
Ethernet Ports (1-8
)
DC Power Cord
PC
PC
Router
LAN PortWAN Port
Internet
Conguration
1� To access the GUI of the switch, open a browser and type the default
management address http://192�168�0�1 in the address field of the
browser, then press the Enter key�
Note: To log in to the switch, the IP address of your PC should be set in the
same subnet as that of the switch� The IP address is 192�168�0�x (”x” is any
number from 2 to 254)� Subnet Mask is 255�255�255�0� For details, please
refer to Appendix B in the User Guide on the resource CD�
2� Enter admin for both the User Name and Password in the lower case
letters� Then click the Login button or press the Enter key�