15
Chapter 3
TP-Link Cloud Service (for Access Point Mode)
3. 1. Register a TP-Link ID
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System > TP-Link ID or click TP-Link ID in the upper right corner of the page.
3. Click Sign Up and follow the instructions to register a TP-Link ID.
4. After activating your TP-Link ID, come back to the TP-Link ID page to log in. The
TP-Link ID used to log in to the access point for the first time will be automatically
bound as an Admin.
Note:
• To learn more about the Admin and User TP-Link ID, refer to Manage the User TP-Link IDs.
• Once you have registered a TP-Link ID on the web management page, you can only register another TP-Link ID via the
Tether APP. Please refer to Manage the Access Point via the TP-Link Tether App to install the app.
• If you want to unbind the admin TP-Link ID from your access point, please go to Advanced > TP-Link ID, an click
Unbind in the Device Information section.
3. 2. Change Your TP-Link ID Information
Follow the steps below to change your email address and password of your TP-Link ID
as needed.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System > TP-Link ID, and focus on the Account Information section.
• To change your email address:
1. Click
behind the Email.
2. Enter the password of your TP-Link ID, then a new email address. And click SAVE .
To Next Page
Loading...
