6
D. Bridge with AP mode
Introduction
In this mode, the product can wirelessly connect two or more remote LANs together.
Settings
After the settings above, please go to
Network Settings on page 8 to continue
the configuration.
E. Client Mode
Introduction
In this mode, the product will act as a wireless adapter to connect your wired devices
(eg. PC, Xbox, PS3, etc.) to a wireless network.
Click Survey on the page of Wireless Settings and the window displaying a list of
available SSIDs will appear.
Find the SSID of the
root Access Point /
Router that you want to
bridge, and then click
Connect in the
corresponding row.
Name the bridge AP
here.
Click Next
You will then return to the previous page. Enter the password that is the same as on
the remote AP and click Next.
To Next Page
Loading...
