11
English
Turn off all your network devices,
including your computer(s), powe
injector and the AP.
Connect your computer to the
LAN port on the power injecto
with an Ethernet Cable.
Note
1. Passive PoE Injector supports a maximum cable length up to 30 meters due to
the environment.
2. For longer powered cable up to 100 meters, please choose TP-LINK's 48V PoE
adapters: TL-POE200 or TL-POE150S & TL-POE10R.
Product information can be found on our official website http://www.tp-link.com.
Connect your AP to the PoE port
on the power injector with an
Ethernet Cable.
Plug the provided power adapte
into the DC jack on the powe
injector, and the other end to a
standard electrical wall socket.
Appendix B: With PoE Setup
To Next Page
Loading...
