4
English
Operation Mode Selection
Access Point Mode
Client Mode
Repeater Mode
This Access Point provides six operational modes: Access Point mode, Multi-SSID,
Client mode, Repeater mode, Universal Repeater mode and Bridge with AP mode.
Please choose an appropriate operation mode for the Access Point.
In this mode, the Access Point will act as a wireless central hub for your wireless
LAN clients, giving a wireless extension for your current wired network. The
Multi-SSID mode is similar to Access Point mode.
In this mode, the Access Point can extend the coverage of another wireless Access
Point or Router. The universal repeater mode is for the wireless Access Point or
Router which does not support WDS function.
In this mode, the Access Point will act as a wireless card to connect with WISP.
To Next Page
Loading...
