8
Chapter 2 Set Up Internet Connection
3. Tap the + icon on the upper-right corner and select Range Extender.
4. Follow app instructions to set up your extender.
5. Relocate your extender to optimize Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of the host network.
2 ) Wait for about 2 minutes until at least three Signal Strength LEDs turn solid on.
If not, relocate the extender closer to the router to achieve better signal quality.
Router Devices
Halfway
≥ 3 LEDs light up
Good
1
2
3
4
5
Best
6. Enjoy! Connect to the extended network and enjoy internet.
Tips:
For more intuitive location assistance, access extender settings via Tether and go to Tools > Location
Assistant. You can also manage your extender via Tether, such as controlling LEDs, sharing passwords of
your networks and blocking devices.
2. 2. 2. Method 2: Via the WPS Button
Use this way if your router has a WPS button. The button might look like one of these:
.
1. Press the WPS button on your host router, and then press the
button on the
extender for 1 second within 2 minutes.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
