TL-WPA4230P AV500 Passthrough Powerline WiFi Extender
11
Note:
If the above screen does not prompt, it means that your web browser has been set to a proxy. Go to
Tools >Internet Options>Connections>LAN Settings, in the screen that appears, cancel the
Using Proxy checkbox, and click OK to finish it.
3.1.2 For Wireless Connection
If your device is
connected to the extender via wireless, you can log in to the extender by following the
steps below:
1. Launch a web browser and type in the default domain name http://tplinkplclogin.net
in the address
field.
Figure 3-4 Log in to the Extender
2. Enter admin for the User name and Password (both in lower case letters) in the screen below. Then
click OK or press Enter.
Figure 3-5 Login Windows
Note:
If the above screen does not prompt, it means that your web browser has been set to a proxy. Go to
Tools>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the
Using Proxy checkbox, and click OK to finish it.
After a successful login, you can configure and manage the device. There are six main menus on the
leftmost column of the web-based management page: Status, Network, Wireless, Powerline and
System Tools. Submenus will be available after clicking one of the main menus. On the right of the
web-based management page lays the detailed explanations and instructions for the corresponding
page.
To Next Page
Loading...
