TL-WPA4230P AV500 Passthrough Powerline WiFi Extender
29
Chapter 4 Connecting to Wireless Network
The default SSID is TP-LINK_××××××. (×××××× stand for the last six unique numbers of the WLAN
MAC which can be found on the label at the bottom of the device.) The default Wireless Password can
also be found on the label of the device.
If you have used the Wi-Fi Clone button to clone Wi-Fi settings from the front router, the SSID and
wireless password of the powerline extender will be the same as the wireless router.
If you have established a secure and separate wireless network from the wireless router, the SSID and
wireless password of the powerline extender will be what you have set.
4.1 In Windows 8
If you are using Windows 8, please follow the steps below to connect to the wireless network of the
powerline extender.
1. Click the icon
at the bottom of your desktop, select the SSID of TL-WPA4230P and then click
Connect.
2. Input the network security key and then click Next.
Note:
If your network is an unsecured network, you will not be prompted to input the network key.
3. Click to select whether to turn on sharing and connect to devices.
To Next Page
Loading...
