TP-Link TL-WPA4230P - 3.2 Device Status

TL-WPA4230P AV500 Passthrough Powerline WiFi Extender
12
3.2 Status
The Status page displays the powerline extender’s current status and configuration. All information is
read-only.
Figure 3-6 Status
 Firmware Version - This field displays the current firmware version of the powerline extender.
 Hardware Version - This field displays the current hardware version of the powerline extender.
 Powerline - This field displays the current settings or information for powerline, including the MAC
address, Device Password and Network Name which can be configured on the Powerline →
Network Settings page.
 MAC Address - The physical address of the powerline extender, as seen from powerline.
 Device Password - The security ID that restricts access to critical device functions.
 Network Name - The name that identifies a logical network.
 Network - The following parameters apply to the Ethernet port of the powerline extender. You can
configure them on the Network page.
 MAC Address - The physical address of the powerline extender's Ethernet port.
 IP Address - The IP address of the powerline extender.
 Subnet Mask - The subnet mask associated with IP address.