TL-WPS510U Pocket-sized Wireless Print Server
70
¾ IP Address: This option allows you to input IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment.
)Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
¾ Subnet Mask: This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
¾ Default Router: This option allows you to input gateway from the print server. This IP address
of gateway must meet the router or gateway to go across of the network segment.
4.4 Misc
4.4.1 Factory Default
Click OK to restore the print server to its Factory Default settings.
Figure 4-11
4.4.2 Firmware Upgrade
Click Browse… to select the firmware file and then click Firmware Upgrade to upgrade the
firmware of the print server.
To Next Page
Loading...
