TP-Link TL-WPS510U - Support and Troubleshooting; Resetting the Print Server

TL-WPS510U Pocket-sized Wireless Print Server
72
Appendix A: How to Resset the Print Server
If you lose the connection with the TL-WPS510U by doing wrong configuration, you need to reset
it to factory and reconfigure it again.
Here are the steps for the resetting
1. Unplug the power adapter of the TL-WPS510U;
2. Press and hold the Reset button on the TL-WPS510U;
3. Plug in the power adapter of the print server with the Reset button pressed for about 10
seconds.
4. Release the Reset button and wait for the Wireless LED (green) flashes.
5. When the Wireless LED light flashes regularly, the TL-WPS510U has finished the resetting
and you can see the WLAN-PS Ad-Hoc network in your wireless network list.