102
Chapter 5
Configure the Router in WISP Mode (Hotspot Mode)
5. 13. 1. Binding Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IP & MAC Binding > Binding Settings.
3. Select Enable for ARP Binding and click Save.
• To add IP & MAC Binding entries:
1. Click Add New.
2. Enter the MAC address and IP address.
3. Tick the Bind checkbox and click Save.
• To modify or delete an existing entry:
1. Select the desired entry in the table.
2. Click Edit or Delete Selected.
5. 13. 2. ARP List
To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
