TP-Link TL-WR802N - Chapter 5. Configure the Router in WISP Mode (Hotspot Mode)

Chapter 5
Configure the Router in
WISP Mode (Hotspot Mode)
This chapter presents how to configure the various features of the router working as a
WISP router (Hotspot router).
It contains the following sections:
• Status
• Operation Mode
• Network
• Wireless
• Guest Network
• DHCP
• Forwarding
• Security
• Parental Controls
• Access Control
• Advanced Routing
• Bandwidth Control
• IP&MAC Binding
• Dynamic DNS
• IPv6
• System Tools
• Log out
Downloaded from ManualsNet.com search engine