68
Chapter 5
Configure the Router in WISP Mode (Hotspot Mode)
5. 3. Network
5. 3. 1. WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > WAN.
3. Configure the IP parameters of the WAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select Dynamic IP, and the router will
automatically get IP parameters from your ISP.
Click Renew to renew the IP parameters from your ISP.
Click Release to release the IP parameters.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
