56
Chapter 4
Configure the Router in Wireless Router Mode
4. 16. System Tools
4. 16. 1. Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools > Time Settings.
• To set time manually:
1. Select your local Time Zone.
2. Enter the Date in Month/Day/Year format.
3. Enter the Time in Hour/Minute/Second format.
4. Click Save.
• To set time automatically:
5. Select your local Time Zone.
6. Enter the address or domain of the NTP Server 1 or NTP Server 2.
7. Click Get GMT to get time from the internet if you have connected to the internet.
• To set Daylight Saving Time:
1. Select Enable Daylight Saving.
2. Select the start time from the drop-down list in the Start fields.
3. Select the end time from the drop-down list in the End fields.
4. Click Save.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
