55
Chapter 4
Configure the Router in Wireless Router Mode
Tunnel 6to4
• WAN Connection - Display the available wan connection.
4. 15. 3. IPv6 LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IPv6 > IPv6 LAN and configure the IPv6 LAN settings as needed.
• Address Auto-Configuration Type - Select a type to assign IPv6 addresses to
the computers in your LAN. RADVD and DHCPv6 Server are provided. I
• Site Prefix Configuration Type - The type of IPv6 address prefix.
• Delegated - Get the IPv6 address prefix from the ISP automatically, and the
device will delegate it to the LAN.
• Static - Configure the Site Prefix and Site Prefix Length manually. Please
contact your ISP to get more information before you configure them.
Note:
If your IPv6 wan connection type is “Tunnel 6to4”, the Site Prefix Configuration Type should be “Static” to make
sure “Tunnel 6to4” works properly.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
