140
Chapter 6
Congure the Router in Access Point Mode
6. 7. 7. Reboot
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools > Reboot.
• To reboot manually
Click Reboot, and wait a few minutes for the router to rebooting.
• To reboot automatically
• Select Timeout in the drop-down list of Enable Auto Reboot and specify a time
period (1-72hours), then the router will reboot automatically after every this
interval.
• Select Schedule in the drop-down list of Enable Auto Reboot and specify the
Time when the router reboots and Day which to decide how often it reboots.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
