171
Chapter 8
Congure the Router in Client Mode
• Select Schedule in the drop-down list of Enable Auto Reboot and specify the
Time when the router reboots and Day which to decide how often it reboots.
8. 6. 6. Account Management
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools > Administrator, and focus on the Account Management section.
You can change the factory default username and password of the router.
It is strongly recommended that you change the default username and password of the
router, for all users that try to access the router’s web-based utility or Quick Setup will
be prompted for the router’s username and password.
Note:
The new username and password must not exceed 15 characters and not include any spacing.
3. Click Save.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
