43
Chapter 4
Configure the Router in Wireless Router Mode
1 ) Click Add New.
2 ) Create a unique description (e.g. schedule_1) for the schedule in the Schedule
Description field and set the day(s) and time period. And then click Add.
3 ) Click Save.
5. Go to Access Control > Rule and add a new access control rule.
1 ) Click Add New.
2 ) Give a name for the rule in the Description field. Select host_1 from the LAN host
drop-down list; select target_1 from the target drop-down list; select schedule_1
from the schedule drop-down list.
3 ) Leave the status as Enabled as click Save.
Note:
When Target is set to be URL Address mode, the Direction field is OUT and not editable, which means
the host can only visit or is not allowed to visit the URL address you set.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
