52
Chapter 4
Configure the Router in Wireless Router Mode
3. Select the WAN Connection Type and fill in the blanks according to your ISP, and
then click Save.
• Dynamic IPv6 - Connections which use dynamic IPv6 address assignment.
• Static IPv6 - Connections which use static IPv6 address assignment.
• PPPoEv6 - Connections which use PPPoEv6 that requires a username and
password.
• Tunnel 6to4 - Connections which use 6to4 address assignment.
Dynamic IPv6
• IPv6 Address - The IPv6 address assigned by your ISP dynamically.
• Prefix Length - The length of IPv6 address prefix.
• IPv6 Gateway - Enter the default gateway provided by your ISP.
• Addressing Type - There are two types of assignation for IPv6 address:
SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host
Configuration Protocol for IPv6) Server.
• MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
